New Britain | Howa HO18 | Bullard | Buck
NEW BRITAIN
— SOFT JAWS
Add “A” to beginning of part number when ordering aluminum jaws.
Add “P” to end part number when ordering pointed jaws.
Made with 1018 steel or 6061 aluminum.
Ø Diameter |
Part Number |
L Length |
H Height |
W Width |
T Tongue Width |
F Bolt Spacing |
F2 Bolt Spacing 2 |
S Key Slot Width |
I Screw Size |
---|---|---|---|---|---|---|---|---|---|
5 7/8 | DM5NB | 2.625 | 2.00 | 2.00 | .499 | 1.000 | N/A | .376 | 3/8 |
6 3/4 | DM6NB | 3.00 | 2.50 | 2.50 | .374 | 1.250 | 1.000 | .376 | 3/8 |
7 1/2 | DM7NB | 3.375 | 2.50 | 2.50 | .374 | 1.438 | 1.063 | .376 | 1/2 |
Howa HO18
— SOFT JAWS
Add “A” to beginning of part number for aluminum jaws.
Made with 1018 steel or 6061 aluminum.
Hard jaws made with 8620 case hardened alloy steel.
Ø Diameter |
Part Number |
L Length |
H Height |
W Width |
B Slot Width |
F Bolt Spacing |
S Key Slot Width |
I Screw Size |
---|---|---|---|---|---|---|---|---|
8 | HW18M8 | 3.94 | 1.50 | 1.25 | .551 | 1.260 | .630 | M10 |
10 | HW18M10 | 4.33 | 1.75 | 1.25 | .630 | 1.339 | .630 | M12 |
12 | HW18M12 | 5.12 | 2.00 | 1.50 | .630 | 1.575 | .787 | M12 |
15 | HW18M15 | 6.30 | 2.50 | 1.50 | .630 | 2.165 | .984 | M12 |
Bullard
— SOFT JAWS
Add “A” to beginning of part number for aluminum jaws.
Made with 1018 steel or 6061 aluminum.
Ø Diameter |
Part Number |
L Length |
H Height |
W Width |
F Bolt Spacing |
S Key Slot Width |
I Screw Size |
---|---|---|---|---|---|---|---|
36+ | DMBUL36 | 6.625 | 4.00 | 3.00 | 3.250 | .626 | 7/8 |
Bullard
— HARD JAWS
Hard jaws made with 8620 case hardened alloy steel.
Ø Diameter |
Part Number |
L Length |
H Height |
W Width |
F Bolt Spacing |
S Key Slot Width |
I Screw Size |
---|---|---|---|---|---|---|---|
DMBUL36RJ | 6.625 | 4.00 | 3.00 | 3.250 | .626 | 7/8 | |
DMBUL36RJ4 | 6.625 | 4.00 | 3.00 | 3.250 | .626 | 7/8 |
Buck
— SOFT JAWS
Add “A” to beginning of part number for aluminum jaws.
Add “P” to end part number when ordering pointed jaws.
Made with 1018 steel or 6061 aluminum.
Ø Diameter |
Part Number |
L Length |
H Height |
W Width |
B Slot Width |
F Bolt Spacing |
S Key Slot Width |
I Screw Size |
---|---|---|---|---|---|---|---|---|
6 | DM1050 | 3.00 | 2.00 | 1.00 | .741 | 1.688 | .375 | 5/16 |
DM1050-3H | 3.00 | 3.00 | 1.00 | .741 | 1.688 | .375 | 5/16 | |
7.5 | DM1105 | 3.188 | 2.00 | 1.25 | .866 | 1.688 | .375 | 5/16 |
Buck
— FULL GRIPS
Made with 6061-T6 aluminum.
Add “C” to beginning of part number when ordering cast iron jaws.
Add “S” to beginning of part number when ordering steel jaws.
Ø Diameter |
Part Number |
H Height |
B Slot Width |
F Bolt Spacing |
S Key Slot Width |
I Screw Size |
Set Ø |
---|---|---|---|---|---|---|---|
6 | DM1050FG | 2.13 | .741 | 1.688 | .375 | 5/16 | 6 |
Buck
— HARD JAWS
Hard jaws made with 8620 case hardened alloy steel.
Hard jaws are reversible for OD & ID chucking.
All hard jaws are available in one or two step sets.
Ø Diameter |
Part Number |
L Length |
H Height |
W Width |
B Slot Width |
F Bolt Spacing |
S Key Slot Width |
I Screw Size |
---|---|---|---|---|---|---|---|---|
DM1050RJ | 2.531 | 1.50 | 1.00 | .741 | 1.688 | .375 | 5/16 | |
DM1050-1RJ | 2.531 | 1.50 | 1.00 | .741 | 1.688 | .375 | 5/16 |