Part#DM1105P
Part # Details
Soft Jaws
Add “A” to beginning of part number when ordering aluminum jaws.
Add “P” to end part number when ordering pointed jaws.
Made with 1018 steel or 6061 aluminum.
| Measurements | |
| Ø-Diameter | 7.5 |
| L-Length | 3.188 |
| H-Height | 2.00 |
| W-Width | 1.25 |
| B-Slot-Width | .866 |
| T-Tongue-Width | |
| F-Bolt-Spacing | 1.688 |
| I-Screw-Size | 5/16 |
| UNITWGT | 0 |
| WEIGHTUNIT | lbs. |
| Set-Ø | |
| S-Key-Slot Width | .375 |
| P-Pitch | |
| Set | |
| M-Thread Size | |
| E-Heel Height | |
| Type | |
| T1-Tongue-Width | |
| # of holes | |
| S1-Step Height | |
| D Griping Range Min | |
| D Griping Range Max | |
| Serration Size | |
| Pad # | |
| Pad ⌀ | |
| Pad T | |
| Pad H | |
| Machine Number & Size | |
| Master Collet Number | |
| Pad Number | |
| Machine Capacity | |
| I.D. Range | |
| AØ (OD) | |
| BØ (ID) | |
| Pin Ø | |
| Pin H | |
| Jaw Stroke | |
| Max Gripping (LBF) | |
| Max Speed (RPM) | |
| F2-Bolt-Spacing 2 | |
| V Height From Chuck Face | |
| Machine Model | |
| RD | |
| HEX | |
| SQ | |
| A Slot Depth | |
Request a Quote