Part#DM20115H
Part # Details
Flat Soft Jaw
Add “A” to beginning of part number when ording aluminum jaws.
Made with 1018 steel or 6061 aluminum.
| Measurements | |
| Ø-Diameter | 15 |
| L-Length | 6.25 |
| H-Height | 3.75 |
| W-Width | 1.75 |
| B-Slot-Width | .501 |
| T-Tongue-Width | .749 |
| F-Bolt-Spacing | 3.000 |
| I-Screw-Size | 5/8 |
| UNITWGT | 10 |
| WEIGHTUNIT | lbs. |
| Set-Ø | |
| S-Key-Slot Width | |
| P-Pitch | |
| Set | |
| M-Thread Size | |
| E-Heel Height | |
| Type | |
| T1-Tongue-Width | |
| # of holes | |
| S1-Step Height | |
| D Griping Range Min | |
| D Griping Range Max | |
| Serration Size | |
| Pad # | |
| Pad ⌀ | |
| Pad T | |
| Pad H | |
| Machine Number & Size | |
| Master Collet Number | |
| Pad Number | |
| Machine Capacity | |
| I.D. Range | |
| AØ (OD) | |
| BØ (ID) | |
| Pin Ø | |
| Pin H | |
| Jaw Stroke | |
| Max Gripping (LBF) | |
| Max Speed (RPM) | |
| F2-Bolt-Spacing 2 | |
| V Height From Chuck Face | |
| Machine Model | |
| RD | |
| HEX | |
| SQ | |
| A Slot Depth | |
Request a Quote