ACME SERRATED KEY TYPE
— SOFT JAWS
Add “A” to beginning of part number when ordering aluminum jaws.
Add “P” to end of part number when ordering pointed jaws.
Made with 1018 steel or 6061 aluminum.
|
Ø Diameter |
Part Number |
L Length |
H Height |
W Width |
T Tongue Width |
F Bolt Spacing |
S Key Slot Width |
I Screw Size |
M Thread Size |
|---|---|---|---|---|---|---|---|---|---|
| 8 | DM13068 | 3.75 | 2.00 | 1.50 | .669 | 1.250 | .601 | 1/2 | 10-24 |
| DM13068P | 3.75 | 2.00 | 1.50 | .669 | 1.250 | .601 | 1/2 | 10-24 | |
| DM13068H | 3.75 | 3.50 | 1.50 | .669 | 1.250 | .601 | 1/2 | 10-24 | |
| DM13068HP | 3.75 | 3.50 | 1.50 | .669 | 1.250 | .601 | 1/2 | 10-24 | |
| DM13068-4H | 3.75 | 4.00 | 1.50 | .669 | 1.250 | .601 | 1/2 | 10-24 | |
| DM13068-4HP | 3.75 | 4.00 | 1.50 | .669 | 1.250 | .601 | 1/2 | 10-24 | |
| 10 | DM13072 | 4.125 | 2.313 | 1.75 | .749 | 1.750 | 1.031 | 1/2 | 5/16-18 |
| DM13072P | 4.125 | 2.313 | 1.75 | .749 | 1.750 | 1.031 | 1/2 | 5/16-18 | |
| DM13602 | 4.125 | 3.813 | 1.75 | .749 | 1.750 | 1.031 | 1/2 | 5/16-18 | |
| DM13602P | 4.125 | 3.813 | 1.75 | .749 | 1.750 | 1.031 | 1/2 | 5/16-18 | |
| DM13072-4.5L | 4.50 | 2.313 | 1.75 | .749 | 1.750 | 1.031 | 1/2 | 5/16-18 | |
| DM13072-4.5LP | 4.50 | 2.313 | 1.75 | .749 | 1.750 | 1.031 | 1/2 | 5/16-18 | |
| DM13602-4.5L | 4.50 | 3.813 | 1.75 | .749 | 1.750 | 1.031 | 1/2 | 5/16-18 | |
| DM13602-4.5LP | 4.50 | 3.813 | 1.75 | .749 | 1.750 | 1.031 | 1/2 | 5/16-18 | |
| 12 | DM13605 | 5.625 | 2.313 | 1.75 | .749 | 1.750 | 1.031 | 1/2 | 5/16-18 |
| DM13605P | 5.625 | 2.313 | 1.75 | .749 | 1.750 | 1.031 | 1/2 | 5/16-18 | |
| DM13606 | 5.625 | 3.813 | 1.75 | .749 | 1.750 | 1.031 | 1/2 | 5/16-18 | |
| DM13606P | 5.625 | 3.813 | 1.75 | .749 | 1.750 | 1.031 | 1/2 | 5/16-18 | |
| DM13605-6L | 6.00 | 2.313 | 1.75 | .749 | 1.750 | 1.031 | 1/2 | 5/16-18 | |
| DM13605-6LP | 6.00 | 2.313 | 1.75 | .749 | 1.750 | 1.031 | 1/2 | 5/16-18 | |
| DM13606-6L | 6.00 | 3.813 | 1.75 | .749 | 1.750 | 1.031 | 1/2 | 5/16-18 | |
| DM13606-6LP | 6.00 | 3.813 | 1.75 | .749 | 1.750 | 1.031 | 1/2 | 5/16-18 | |
| DM13071 | 4.125 | 2.313 | 1.75 | .874 | 2.000 | 1.031 | 5/8 | 5/16-18 | |
| DM13071P | 4.125 | 2.313 | 1.75 | .874 | 2.000 | 1.031 | 5/8 | 5/16-18 | |
| DM13607 | 4.125 | 3.813 | 1.75 | .874 | 2.000 | 1.031 | 5/8 | 5/16-18 | |
| DM13607P | 4.125 | 3.813 | 1.75 | .874 | 2.000 | 1.031 | 5/8 | 5/16-18 | |
| DM13609 | 5.125 | 2.313 | 1.75 | .874 | 2.000 | 1.031 | 5/8 | 5/16-18 | |
| DM13609P | 5.125 | 2.313 | 1.75 | .874 | 2.000 | 1.031 | 5/8 | 5/16-18 | |
| DM13610 | 5.125 | 3.813 | 1.75 | .874 | 2.000 | 1.031 | 5/8 | 5/16-18 | |
| DM13610P | 5.125 | 3.813 | 1.75 | .874 | 2.000 | 1.031 | 5/8 | 5/16-18 | |
| DM13609-5.5L | 5.50 | 2.313 | 1.75 | .874 | 2.000 | 1.031 | 5/8 | 5/16-18 | |
| DM13610-5.5L | 5.50 | 3.813 | 1.75 | .874 | 2.000 | 1.031 | 5/8 | 5/16-18 | |
| DM13610-5.5LP | 5.50 | 3.813 | 1.75 | .874 | 2.000 | 1.031 | 5/8 | 5/16-18 | |
| DM13609-6L | 6.00 | 2.313 | 1.75 | .874 | 2.000 | 1.031 | 5/8 | 5/16-18 | |
| DM13609-6LP | 6.00 | 2.313 | 1.75 | .874 | 2.000 | 1.031 | 5/8 | 5/16-18 | |
| DM13610-6L | 6.00 | 3.813 | 1.75 | .874 | 2.000 | 1.031 | 5/8 | 5/16-18 | |
| DM13610-6LP | 6.00 | 3.813 | 1.75 | .874 | 2.000 | 1.031 | 5/8 | 5/16-18 | |
| 15-18 | DM13070 | 6.00 | 3.25 | 2.50 | .999 | 2.500 | 1.531 | 3/4 | 3/8-16 |
| DM13070P | 6.00 | 3.25 | 2.50 | .999 | 2.500 | 1.531 | 3/4 | 3/8-16 | |
| DM13611 | 6.00 | 4.75 | 2.50 | .999 | 2.500 | 1.531 | 3/4 | 3/8-16 | |
| DM13611P | 6.00 | 4.75 | 2.50 | .999 | 2.500 | 1.531 | 3/4 | 3/8-16 | |
| DM13070L | 3.125 | 3.25 | 2.50 | .999 | 2.500 | 1.531 | 3/4 | 3/8-16 | |
| DM13070LP | 3.125 | 3.25 | 2.50 | .999 | 2.500 | 1.531 | 3/4 | 3/8-16 | |
| DM13611L | 3.125 | 4.75 | 2.50 | .999 | 2.500 | 1.531 | 3/4 | 3/8-16 | |
| DM13611LP | 3.125 | 4.75 | 2.50 | .999 | 2.500 | 1.531 | 3/4 | 3/8-16 | |
| DM13070-6.5L | 6.50 | 3.25 | 2.50 | .999 | 2.500 | 1.531 | 3/4 | 3/8-16 | |
| DM13070-6.5LP | 6.50 | 3.25 | 2.50 | .999 | 2.500 | 1.531 | 3/4 | 3/8-16 | |
| DM13611-6.5L | 6.50 | 4.75 | 2.50 | .999 | 2.500 | 1.531 | 3/4 | 3/8-16 | |
| DM13611-6.5LP | 6.50 | 4.75 | 2.50 | .999 | 2.500 | 1.531 | 3/4 | 3/8-16 | |
| DM13070-7.5L | 7.50 | 3.25 | 2.50 | .999 | 2.500 | 1.531 | 3/4 | 3/8-16 | |
| DM13070-7.5LP | 7.50 | 3.25 | 2.50 | .999 | 2.500 | 1.531 | 3/4 | 3/8-16 | |
| DM13611-7.5LP | 7.50 | 4.75 | 2.50 | .999 | 2.500 | 1.531 | 3/4 | 3/8-16 | |
| DM13611-7.5L | 7.50 | 4.75 | 2.50 | .999 | 2.500 | 1.531 | 3/4 | 3/8-16 | |
| 21-24 | DM13069 | 6.00 | 3.25 | 3.00 | 1.249 | 3.000 | 1.531 | 7/8 | 3/8-16 |
| DM13069P | 6.00 | 3.25 | 3.00 | 1.249 | 3.000 | 1.531 | 7/8 | 3/8-16 | |
| DM13618P | 6.00 | 4.75 | 3.00 | 1.249 | 3.000 | 1.531 | 7/8 | 3/8-16 | |
| DM13618 | 6.00 | 4.75 | 3.00 | 1.249 | 3.000 | 1.531 | 7/8 | 3/8-16 |
Acme Serrated Key Type
— FULL GRIPS
Made with 6061-T6 aluminum.
Add “C” to beginning of part number when ordering cast iron jaws.
Add “S” to beginning of part number when ordering steel jaws.
|
Ø Diameter |
Part Number |
H Height |
T Tongue Width |
F Bolt Spacing |
S Key Slot Width |
I Screw Size |
M Thread Size |
Set Ø |
|---|---|---|---|---|---|---|---|---|
| 8 | DM13068FG | 2.00 | .669 | 1.250 | .601 | 1/2 | 10-24 | 8" |
| 10 | DM13072FG | 2.00 | .749 | 1.750 | 1.031 | 1/2 | 5/16-18 | 10" |
| DM13072HFG | 4.00 | .749 | 1.750 | 1.031 | 1/2 | 5/16-18 | 10" | |
| 12 | DM13605FG | 2.375 | .749 | 1.750 | 1.031 | 1/2 | 5/16-18 | 12" |
| DM13605HFG | 4.00 | .749 | 1.750 | 1.031 | 1/2 | 5/16-18 | 12" | |
| DM13071FG | 2.375 | .874 | 2.000 | 1.031 | 5/8 | 5/16-18 | 12" | |
| DM13071HFG | 4.00 | .874 | 2.000 | 1.031 | 5/8 | 5/16-18 | 12" | |
| DM13071-6HFG | 6.00 | .874 | 2.000 | 1.031 | 5/8 | 5/16-18 | 12" | |
| 15 | DM13070FG | 3.00 | .999 | 2.500 | 1.531 | 3/4 | 3/8-16 | 15" |
| DM13070HFG | 4.00 | .999 | 2.500 | 1.531 | 3/4 | 3/8-16 | 15" | |
| 21 | DM13069FG | 3.00 | 1.249 | 3.000 | 1.531 | 7/8 | 3/8-16 | 21" |
| DM13069HFG | 4.00 | 1.249 | 3.000 | 1.531 | 7/8 | 3/8-16 | 21" |
Acme Serrated Key Type
— HARD JAWS
Made with 8620 case hardened alloy steel.
Hard jaws are reversible for OD & ID chucking.
All hard jaws are available in one or two step sets.
All part #’s listed below are two step sets.
|
Ø Diameter |
Part Number |
L Length |
H Height |
W Width |
T Tongue Width |
F Bolt Spacing |
S Key Slot Width |
I Screw Size |
M Thread Size |
|---|---|---|---|---|---|---|---|---|---|
| 8 | DM13068RJ | 3.75 | 2.00 | 1.50 | .669 | 1.250 | .601 | 1/2 | 10-24 |
| 10 | DM13072RJ | 4.75 | 2.313 | 1.75 | .749 | 1.750 | 1.031 | 1/2 | 5/16-18 |
| DM13072-1RJ | 4.75 | 2.313 | 1.75 | .749 | 1.750 | 1.031 | 1/2 | 5/16-18 | |
| 12 | DM13071RJ | 5.125 | 2.313 | 1.75 | .874 | 2.000 | 1.031 | 5/8 | 5/16-18 |
| 15-18 | DM13070RJ | 6.00 | 3.25 | 2.50 | .999 | 2.500 | 1.531 | 3/4 | 3/8-16 |
| DM13070-1RJ | 6.00 | 3.25 | 2.50 | .999 | 2.500 | 1.531 | 3/4 | 3/8-16 | |
| 21-24 | DM13069RJ | 6.00 | 3.25 | 3.00 | 1.249 | 3.000 | 1.531 | 7/8 | 3/8-16 |
| DM13069-1RJ | 6.00 | 3.25 | 3.00 | 1.249 | 3.000 | 1.531 | 7/8 | 3/8-16 |
|
Ø Diameter |
Part Number |
L Length |
H Height |
W Width |
F Bolt Spacing |
M Thread Size |
T1 Tongue Width |
E Heel Height |
|---|---|---|---|---|---|---|---|---|
| 8 | DM8JNA | 2.00 | 1.00 | 1.03 | 1.250 | 1/2-13 | .668 | .440 |
| 10 | DM10JNA | 2.50 | .640 | .940 | 1.750 | 1/2-13 | .678 | .381 |
| 12 | DM12JNA | 3.00 | .745 | 1.06 | 2.000 | 5/8-11 | .802 | .440 |
| 15 | DM15JNA | 3.50 | .931 | 1.25 | 2.500 | 3/4-10 | .933 | .550 |
| 21-24 | DM21JNA | 4.25 | 1.186 | 1.555 | 3.000 | 7/8-9 | 1.159 | .684 |
|
Ø Diameter |
Part Number |
L Length |
H Height |
W Width |
I Screw Size |
P Pitch |
A Slot Depth |
|---|---|---|---|---|---|---|---|
| 8 | DM8AK | 1.50 | .383 | .600 | 10-24 | 5/32 | .13 |
| 10-12 | DM12AK | 1.687 | .500 | 1.030 | 5/16 | 1/4 | .13 |
| 15-18 | DM15AK | 2.437 | .500 | 1.530 | 3/8 | 1/4 | .13 |
| 21-24 | DM21AK | 2.875 | .500 | 1.530 | 3/8 | 1/4 | .13 |
Acme Serrated Key Type Jaws from Dillon Manufacturing
At Dillon Manufacturing, we provide reliable and versatile Acme key type jaws for workholding applications. Our Acme chuck jaws are made in the USA and readily available to be shipped across the United States.
Dillon Manufacturing’s Acme serrated key type jaws include:
-
- Soft jaws made from 1018 steel or 6061 aluminum
- Full-grip jaws made of 356 cast aluminum
- Hard jaws made from 8620 case hardened alloy steel
- Jaw nuts
- Acme serrated master key jaws
A Leading Manufacturer of Acme Key Type Jaws
At Dillon Manufacturing, we strive to provide all of our customers with products that will help increase productivity and efficiency.
In addition to Acme serrated key type jaws, we also provide the following workholding products:
-
- Serrated jaws
- Tongue & groove jaws
- Pin location type jaws
- Collet pads and jaws
- Claw jaws
- Vise jaws
- Jaw boring rings
- Square serrated key type jaw
- Chucks
- Miscellaneous jaws
Along with our vast line of standard workholding solutions, we also offer custom special jaws. When you place an order for a custom jaw from Dillon Manufacturing, our team of experts will work closely with you to ensure that your unique application requirements are met.
Contact Us for Acme Chuck Jaws and Other Workholding Solutions
When you partner with Dillon Manufacturing, you can anticipate high-quality products backed by superior customer service.
If you are in need of Acme serrated jaws or any other workholding solutions, reach out to the Dillon Manufacturing team today. We’re ready to work with you!